Location:Home > Parts information > Turbo shaft > The RC jet turbine engine for helicopters.

The RC jet turbine engine for helicopters.

Time:2015-07-08 07:34Turbochargers information Click:

rc jet turbine rc jet micro tu

The RC Jet Turbine Engine for Helicopters

The RC jet turbine is a type of RC jet that can be successfully used in the RC helicopter. How it works and tips on selection along with links to related sites.

Wren 44 helicopter unit

RC jet powered RC helicopters are now a perfectly practical ( but quite expensive! ) proposition. The unit is very similar to that used for turboprop model jet engines, (Click here for more data) with one difference- the gear reduction box has a 90 degree shaft output.

This puts the drive shaft in the same position as a conventionally powered RC helicopter. In fact, some manufacturers are offering RC turbine power as an option to the well known types, like gas, nitro or electric power.

Wren 44i helicopter turbine

Note that the output shaft is pointing upwards, for connection to the helicopter main and tail rotors.

You will also notice that this RC jet turbine is a 2-stage unit. This arrangement is about 80% more efficient than a single stage unit and is highly recommended.

2-stage turbo model jet engines are more expensive than single stage models but are the way to go today, for helicopters and turboprops

The 2-stage concept is explained in more detail on this page, "Model Jet Engines." Click here.

The first stage of these engines are identical to the micro turbine used in fixed wing RC jets and are explained in more detail, on the page "RC Jet Engines Simplified". Click here to visit the page.

Performance of the Wren 44i RC jet turbine 

has a weight of 13.5LB and a rotor diameter of 720mm.

Now this model is capable of 3D aerobatics and a scale model would be a little larger and heavier.

This photo shows the interior construction of the Magnum 44.

 Note that the turbine is facing rearwards!. This helps with balancing the RC helicopter and also gives some protection in the event of contact with terra firma- it happens to all of us, at some point!

The JetCat Turbine

JetCat Turbines offer a wide range of RC jet turbines, for aerobatic as well as scale RC helicopters. These models are available, in North America, from 2 distributors- 

  • East Coast Scale Helicopters.
  • Eastern Helicopters Vario Canada.
  • This photo shows the JetCat SPH5. This is a 2-stage turbine and note the fan mounted to the gearbox. This keeps the temperature to reasonable levels.

    This RC jet turbine produces over 11 HP and can power helicopters with a rotor diameter of 1.8 to 3.2 meters.

    Note that the maintenance interval of 50 hours, refers to the period when the unit should be returned to the manufacturer for service. This usually means replacement of the main bearings. These ceramic units are subject to extremely high RPMs and temperatures and it is amazing they last as long as they do! The cost of replacement is about $100 each-but check with the supplier for more accurate costs.

    Affiliate Statement

      Some of the links on this page are “affiliate links.” This means if you click on the link and purchase the item, I will receive a  small affiliate commission. There is no extra cost to you. Because my integrity and your satisfaction are very important to me,  I only recommend products or services I use personally or would purchase, and believe will benefit my readers. This income is used to help pay for this site. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising" For further information, please click here.

    Return from this page "The RC Jet Turbine for RC Helicopters" to the page "RC Helicopters".

    Return to the Home page "RC Airplanes Simplified".

    New! Comments Have your say about what you just read! Leave me a comment in the box below.

    Copyright infringement? Click Here!